How To Pair Sony Srs Xb13

Pairing is the procedure required to mutually annals the information on BLUETOOTH devices to be connected wirelessly.

To pair with a 2d or subsequent BLUETOOTH device, perform the following pairing procedure for each device.

Before operating the speaker, exist sure to practice the following:

• Place the BLUETOOTH device within 1 m (iii.2 ft) of the speaker.

• Connect the speaker to an Air-conditioning outlet via a USB Air-conditioning adaptor (commercially bachelor). Or charge the built-in battery sufficiently.

• To avoid whatever sudden loud audio output from the speaker, turn downward the volume of both the BLUETOOTH device and the speaker or end music playback.

  Depending on the BLUETOOTH device, the volume of the device may be synchronized with the speaker.

• Prepare the operating instructions supplied with the BLUETOOTH device for reference.

1. Turn on the speaker.

   

2. Check the status of the(BLUETOOTH) indicator.

   When the indicator is double flashing

   

   After you pair the speaker with a BLUETOOTH device for the offset time since purchase or initialize the speaker (the speaker has no pairing information), the speaker automatically enters pairing mode when it is turned on. Continue to footstep.

   When the indicator is flashing slowly

   

   The speaker is searching for a BLUETOOTH device.

   • To pair the speaker with a 2nd or subsequent BLUETOOTH device (when the speaker has pairing information of other BLUETOOTH devices), keep to step.

   • To reconnect to the BLUETOOTH device that has been registered (paired), proceed to stride. The speaker will automatically be connected just by turning on the BLUETOOTH part on the BLUETOOTH device. Depending on the BLUETOOTH device, it may be reconnected just by turning on the power to the speaker. For details, refer to the operating instructions supplied with the BLUETOOTH device.

   When the indicator stays lit

   

   The speaker has been connected to the BLUETOOTH device.

   To connect to other BLUETOOTH devices, follow i of the procedures beneath.

   • To pair the speaker with a 2d or subsequent BLUETOOTH device (when the speaker has pairing information of other BLUETOOTH devices), proceed to stride.

   • To reconnect to the BLUETOOTH device that has been registered (paired), proceed to footstep. The speaker volition automatically be connected only by turning on the BLUETOOTH part on the BLUETOOTH device.

3. Printing the(BLUETOOTH) button.

   You hear a beep from the speaker and the(BLUETOOTH) indicator starts double flashing (pairing mode).

   

4. Perform the pairing procedure on the BLUETOOTH device to observe the speaker.

   When a list of detected devices appears on the display of the BLUETOOTH device, select "SRS-XB13."

   If a passkey^* is required on the display of the BLUETOOTH device, enter "0000."

5. Brand the BLUETOOTH connection from the BLUETOOTH device.

   When the BLUETOOTH connection is established, you hear a beep from the speaker and the activity of the(BLUETOOTH) indicator changes from flashing to lit.

   

   If the BLUETOOTH connectedness is not established, repeat from step.

Hint

• Equally long as the BLUETOOTH function is activated on a BLUETOOTH device that has previously been connected with the speaker, the speaker is reconnected with the device right after it is turned on.

• The above instructions on the BLUETOOTH device are provided every bit an example. For details, refer to the operating instructions supplied with the BLUETOOTH device.

Annotation

• The pairing mode of the speaker is released later on about 5 minutes and the(BLUETOOTH) indicator flashes slowly. Still, when the speaker has no pairing information, such equally at the factory settings, the pairing mode is non released. If the pairing manner is released before finishing the process, echo from step.

• The passkey of the speaker is "0000." If a passkey besides "0000" is assault the BLUETOOTH device, pairing cannot be done with the speaker.

• In one case the BLUETOOTH devices are paired, there is no need to pair them again, except in the post-obit cases:

  • Pairing information has been deleted after repair, etc.

  • The speaker is already paired with eight devices and some other device is to exist paired.

    The speaker can be paired with up to 8 devices. If a new device is paired subsequently 8 devices accept already been paired, the device that was paired earliest is replaced by the new one.

  • The pairing information with the speaker has been deleted from the BLUETOOTH device.

  • The speaker is initialized.

    All pairing information volition be deleted. If you initialize the speaker, it may not be able to connect your BLUETOOTH device. In this example, erase the pairing data of the speaker on your BLUETOOTH device, and then perform the pairing process once again.

• The speaker can be paired with multiple devices, merely can only play music from one paired device at a time.

Source: https://helpguide.sony.net/speaker/srs-xb13/v1/en/contents/TP1000198317.html

Share this post