How To Make A Palm Tree Out Of Paper

Download Article

Download Article

Making paper trees is a neat way to pass the time on a rainy day or learn more about nature. Luckily, in that location are all sorts of ways to brand paper trees. From pine copse to palm copse, the possibilities are countless! All-time of all, once you are done, you'll accept a beautiful tree to display in your dollhouse, diorama, or on your desk.

1. 

   1

   Fold chocolate-brown newspaper in one-half and draw half of a bare tree along the fold. Find a sail of heavy brown newspaper, such as cardstock, and fold it in half. Draw half of a bare tree shape along the fold. Exist sure to include the roots, trunk, and branches. Practice non include whatever leaves.^[1]

   • Make sure that the roots are flat and straight along the lesser border.
   • If you don't know how to describe a bare tree, notice a template online. You can also start with one-half of a Y-shape, and add branches to the arm.

2. 2

   Cut the tree out and make a 2d copy. Cut the tree out commencement. Fold a second sail of brown paper in half, then trace your tree onto the folded border. Cut the second tree out too. Yous will end up with 2 identical tree shapes.^[two]

   Advertisement

3. 

   3

   Glue the copse together along 1 of the folded sides. Keep both trees folded. Glaze 1 side of your first tree with mucilage. Press your second tree against the first one. Make sure that the folded edges, trunk, roots, and branches all align.^[3]

4. 

   iv

   Unfold the tree, stand it up, and let it dry out. Open up the folded copse up so that you have 3 "pages." Bend the first and last pages and then that the tree forms a T shape when you lot look downwardly on it. Stand up the tree upwardly and let it dry.

5. 

   5

   Fold a piece of sparse green paper like a fan. Find a sheet of sparse green paper, such as tissue paper or a napkin. You can also color printer paper with green markers, crayons, or paint, and employ that instead. Fold the paper back and forth like a fan.^[4]

   • Do non use cardstock or construction paper, or the leaves will be too heavy.
   • Your newspaper does not have to be green. Try scarlet, orange, or yellow for an autumn tree!

6. 

   vi

   Cut a leaf shape out of the fan while information technology is still folded. Draw a small leaf on the fan; make information technology almost ⁱ⁄_ii inch (1.3 cm) wide and 1 inch (2.v cm) long. Cut the leaf shape out of the fan while it is still folded. This volition give you lots of leaves with merely one cut!^[5]

   • Repeat this step to create as many leaves as you desire on your tree. Apply dissimilar shades of green for a more realistic effect.
   • Crease the leaves in half lengthwise to make them more real.

7. vii

   Glue the leaves to the tree branches. Utilise a mucilage stick or a pocket-sized amount of liquid schoolhouse mucilage. You can attach as many or every bit few leaves equally you lot desire to your tree. For a more realistic tree, glue on small clumps of leaves. Don't get also carried away, however, or your tree may tip over.^[vi]

8. 

   viii

   Cut an animal out of paper and add it to the tree, if desired. Describe a small bird, nest, owl, or squirrel on construction paper, then cut it out. Gum it to your tree, shut to the trunk.

   • Don't put the creature or nest too far out on the branches, or your tree may tip over.

9. 9

   Let the tree dry. How long this takes depends on the blazon of glue y'all used. A glue stick dries inside 1 to 2 hours. Liquid school gum may take a lot longer, however. You would expect until the newspaper is dry and no longer damp.

Advertisement

1. one

   Cutting a semicircle out of a green sheet of paper. Use a pencil and a small plate to draw a circle on a sheet of green construction paper or cardstock. Cut the circle out, then fold information technology in half to find the center. Cut the circumvolve along the fold.^[7]

   • Save i of the halves for another project, and continue the other half for this project.

2. 

   2

   Roll the semicircle into a cone and glue it together. Bring the straight edges of the semicircle together, then overlap them until y'all get a cone shape. Gum or staple the cone together.^[8]

   • If you use glue, let it dry earlier moving on. A glue stick or liquid schoolhouse mucilage will work simply fine hither.

3. 3

   Cutting green tissue paper into 1 in (2.five cm) squares. Cut some dark-green tissue paper into several 1 in (2.5 cm) wide strips. Stack the strips together, then cut them into 1 in (2.5 cm) squares. This volition save y'all lots of cut fourth dimension.

   • Use dissimilar shades of greenish for a more interesting effect.
   • If you can't detect green tissue paper, effort a greenish napkin instead.

4. 

   4

   Wrap a tissue paper foursquare over the terminate of a pencil. Place 1 tissue paper square over the eraser end of a pencil. Make sure that information technology is centered, then fold downward the edges to cover the pencil eraser.^[9]

5. v

   Place some glue onto the cone, then press the tissue paper confronting it. Utilise a paintbrush to employ a thin glaze of glue to a small surface area on your cone. Press the eraser end of the pencil against the gum, then pull it abroad. The tissue paper square should exist stuck to the cone.^[10]

   • You can try using a glue stick, but you volition need to support the cone from the inside with your hand so that it doesn't crumple.

6. 

   6

   Utilize the pencil to glue more tissue newspaper squares to the cone. Work 1 tissue paper square at a time. Place the squares close plenty and then that they bear on. Work from 1 side of the cone to the other. It does not matter if you offset from the top or bottom of the cone.^[xi]

   • Apply the glue to the cone in small-scale patches, otherwise it will dry too fast.
   • Do not utilise too much mucilage, or the tissue paper volition slide off.

7. seven

   Set the cone aside to dry. In one case your cone is filled to your liking, set it aside some place where it won't get bumped or knocked over. How long the mucilage takes to dry depends on the type of glue you used. Expect to wait 1 to 2 hours for a glue stick, and a whole day for school gum.^[12]

8. 

   8

   Hot glue the cone to the acme of an empty toilet newspaper roll. Stand an empty toilet paper roll upwardly on its finish. Coat the tiptop edge of the toilet paper roll with hot gum, tacky gum, or white school glue. Place the cone on top and permit it dry.^[xiii]

   • If you don't have any toilet paper rolls, curl a slice of brown paper into a 4 ^one⁄₂  in (xi cm) alpine tube, and use that instead.
   • You can as well cut an empty paper towel gyre down until it is 4 ¹⁄₂ inches (11 cm) tall.
   • If you want to get crafty, paint the toilet paper curl brown beginning. Acrylic craft paint, tempera paint, or affiche paint volition all piece of work fine.

9. 9

   Glue pompoms to your tree to decorate it. Utilise a driblet of hot glue or schoolhouse gum to a pompom, then printing the pompom confronting the tree. Employ as many as you lot want. If you don't have whatever pompoms, crumple colorful tissue newspaper into small assurance, and apply those instead.^[14]

   • Decorate your tree with other items, such equally arts and crafts foam shapes, buttons, tinsel, or yarn.
   • You tin get pompoms in the kids' section of a craft store.

Ad

1. 

   1

   Ringlet a sheet of dark-green paper into a cone. Accept a sheet of green construction paper and roll it lengthwise into a cone shape. Staple or glue the paper together.^[xv]

   • Alternatively, you lot can pigment a Styrofoam cone green, and utilise that instead.^[16]

2. 

   ii

   Cut the bottom of the cone then that it is directly. Considering you used a square or rectangular sheet of paper, the lesser of your cone won't be even. Starting at the shortest border of your cone, cut around the base of operations until you are back to where you lot started. Your tree should be almost 10 to xi inches (25 to 28 cm) tall.

   • Don't flatten your cone and cut across the bottom, or yous'll bend it out of shape.

3. 3

   Cut some wide and narrow strips of green paper. Have some other sheet of green structure paper. Cut it lengthwise into strips. Brand 1 i in (two.5 cm) wide strip, 2 2 in (5.ane cm) wide strips, and 2 iii in (vii.6 cm) wide strips. These will make the layers for your branches. The narrower strips volition go towards the top, and the wider strips towards the lesser.^[17]

4. 

   iv

   Cut a fringe into 1 of the long edges of each strip. Start the fringe at the bottom long edge, and terminate it ^one⁄₂ inch (ane.iii cm) from the top long border. Make the slits about ^ane⁄_eight to ¹⁄₄ inch (0.32 to 0.64 cm) apart.^[18]

   • Stack the strips together to brand your cut faster.

5. 

   5

   Roll the fringes lengthwise. Concur your fringe parallel to the edge of a table or a long, thick dowel. Wrap the cut ends of the fringe over the tabular array edge or dowel to curl information technology. Leave the uncut top border of the fringe alone. Do this for all of the fringed strips.

   • Curl the fringes from the long bottom edge towards the superlative edge. Do not curl them from narrow cease to narrow end.

6. 

   6

   Wrap and gum the widest strip to the lesser border of the cone. Take one of your three in (vii.vi cm) broad strips and coat the top uncut border with glue. Wrap the strip around the bottom edge of your cone, then cutting off the excess.^[xix]

   • Make certain that the fringe is curling outward, not inwards.

7. 

   vii

   Gum the rest of the fringes to the tree, working your style to the meridian. Apply the 3 in (7.half dozen cm) wide strips beginning, and so the 2 in (v.1 cm) ones. If you nevertheless have room at the end, add the 1 in (2.5 cm) broad strip.^[20]

8. eight

   Let your tree dry, so decorate it every bit desired. Gum pompoms or buttons to the tree for a rustic expect. Y'all can besides cut shapes out of craft foam or felt, and apply those instead. For a more natural wait, paint the ends of the fringes with white paint.^[21]

Advertizement

1. ane

   Paint an empty toilet newspaper roll with brown paint and allow it dry. Discover an empty toilet paper roll. Pigment it with chocolate-brown acrylic craft paint, tempera paint, or affiche paint, then permit information technology dry. For a more than realistic tree, describe black lines beyond the trunk.^[22]

   • If you desire a big palm tree, utilize an empty paper towel roll instead.
   • If you tin can't find an empty toilet or paper towel curlicue, roll a sheet of dark-brown newspaper into a tube, staple it, and utilise that instead.

2. 

   2

   Cutting 5 3 in (7.6 cm) long leaves out of light-green structure paper. Fold a sheet of dark-green construction paper in half. Draw iii in (7.6 cm) long half-leafage shapes along the fold, and so cutting them out. Echo this stride using more paper every bit needed until your take five leaves.^[23]

3. 

   3

   Cut a fringe into the edges of the leaves. Keeping the leaves folded, cut a fringe into the curved edges of the leaves. Exit a ¹⁄₄ to ¹⁄₄  in (0.64 to 0.64 cm) gap between the fringe and the folded edge of each leaf.^[24]

4. 

   4

   Tape or glue greenish pipe cleaners to the leaves. Cutting 2 green pipe cleaners into thirds to make them shorter. Open up your leaves, and tape a pipage cleaner downwardly the middle of each foliage. Brand certain that you take 1 to two inches (ii.5 to five.one cm) of pipe cleaner sticking out of the end of each foliage.

   • Hot glue or tacky glue will work the best, but exist certain to let information technology dry.
   • Yous'll have ane mini pipe cleaner leftover. Save information technology for some other craft.

5. 

   5

   Glue the pipe cleaners to the inside of your toilet paper coil. Glaze the pipe cleaners with hot mucilage or tacky glue, then tuck them within the toilet paper curlicue. Press them against the inside walls of the roll, then let the glue dry out.^[25]

   • You can also utilize pieces of masking tape instead.
   • Tuck the pipe cleaners far plenty into the toilet paper ringlet and so that the ends of the leaves bear on the peak of the toilet paper roll.

6. 

   6

   Bend the leaves downward once the gum dries. This will make the palm copse await for realistic. If you want to, you can bend the leaves so that they are curved rather than direct. For an even more realistic touch, hot mucilage some brown pompoms to the elevation of the tree to make coconuts.

Advertisement

Add New Question

• Question

  How do I brand a tree without tissue paper?

  

  You tin simply get a toilet curl, dark-green paper and pair of scissors. Cut the top of the toilet ringlet and then scrunch up your slice of paper. Add some reddish circle (optional), then put it in you toilet roll and you've got yourself a tree.

• Question

  How do I make the giving tree?

  

  If you want to make the giving tree, try adding real or fake apples. If y'all tin, make the branches and most of the stump removable so information technology can really be like the giving tree.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertising

• Your tree does not take to be greenish. You can make information technology red, orangish, or yellow.

• Add some pink or white flowers to your tree. Crumpled pieces of tissue paper work great for this.

• Make more than copse and turn your desk-bound into a wood!

Thank you for submitting a tip for review!

Advertisement

• Use a low-temp hot gum gun. A high-temp hot mucilage gun can cause blisters and burns.

Advertisement

Things You'll Need

• Brown cardstock
• Green tissue paper
• Scissors
• Glue
• Arts and crafts materials (pompoms, buttons, sequins, etc.)

• Green construction paper
• Empty toilet paper roll
• Green tissue paper squares
• Pencil
• Glue
• Scissors
• Chocolate-brown acrylic, tempera, or poster paint (optional)
• Paintbrushes (if using paint)
• Arts and crafts materials (pompoms, buttons, sequins, etc.)

• Light-green construction newspaper
• Glue
• Scissors
• Arts and crafts materials (pompoms, buttons, sequins, etc.)

• Dark-green construction newspaper
• Empty paper towel gyre
• Scissors
• Glue
• Chocolate-brown pompoms (optional)

Nearly This Article

Article Summary Ten

To make a paper tree for kids, start by making a tree torso out of paper towel or toilet paper roll. If you lot don't have these, y'all could use some brown construction paper instead and just curl that upwards. You tin paint your torso with brown paint, if you want. Then, fold a sail of light-green structure paper in half and cut out one-half ovals to make leaves. You lot can make branches out of pipe cleaners or craft your own with some chocolate-brown construction newspaper. Just glue on the leaves and decorate as desired. To acquire how to make a Christmas tree out of tissue paper, scroll down!

Did this summary help you?

Thanks to all authors for creating a page that has been read 354,613 times.

Did this article assistance you?

Source: https://www.wikihow.com/Make-a-Paper-Tree-for-Kids

Share this post